Purchased equipment: fluidised bed boiler
Location: WUXI China
Telephone: +86 13861509127
E-mail: [email protected]
Contact us for more details about our boilers, solutions and services.

fluidised bed boiler
Others

Molten salt heaters use molten potassium nitrate and sodium nitrite as heating media. Molten salt heater will heat the powder salt over the melting point until the viscosity of the molten salt allows circulating pump works, after the whole system is under circulating condition, then feed then into the thermal fluid heater for further circulating rising temperature to make it to be recycling used. Normal media working temperature is 400-550℃, top working temperature could reach 600℃.

Technical advantages

Digitized manufacture

  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.
  • The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.

Long life span

  • The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;
  • Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.
  • Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.

Less fuel consumption

  • Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.
  • Furnace adopts double close line coil, which makes heating surface sufficient.

Add Comment

Korea CFBC boilers - circulatingfluidizedbedboiler.c

Circulating fluidised bed Boiler Cases. ZG Boiler Workshop. Why choose ZG Boiler as Korea CFBC boilers manufacturer. We have over 70 years' experience of boiler and autoclave, and we have a professional installation and after-sales staff for products.Take advantage of the most economical way to improve efficiency and operating flexibility, Get

Circulating fluidized bed(CFB) boiler working principl

CFB boiler working principle and How does the CFB boiler work can be get in this page, ZG is a circulating fluidized bed boiler manufacturer in China,With several years R&D, ZG boiler’s Circulating Fluidized Bed (CFB) boiler is characterized by its compatibility with a wide variety of fuels including: low-grade coal, biomass, sludge, waste plastics, etc

Atmospheric Fluidised Bed Combustion Boilers for Firin

economic promise. The AFBC Boiler achieves this by carrying out combustion in a bed of crushed refractory / sand which is suspended by an upward stream of air, fluidising it and facilitating a significant higher degree of combustion completeness. In addition to this inherent advantage of the fluidised bed combustion process,

Circulating Fluidized-Bed Boilers - babcock.c

Circulating Fluidized-Bed (IR-CFB) Boilers Drawing upon our extensive technical expertise and operating experience, B&W developed the Internal Recirculation Circulating Fluidized-Bed (IR-CFB) boiler which is the technology of choice for power plant owners seeking economy, reliability and flexibility.

fluidised bed combustion - kodim0604-karawang.c

A fluidised bed is a physical phenomenon occurring when a quantity of a solid particulate substance (usually present in a holding vessel) is placed under appropriate conditions to cause a solid/fluid mixture to behave as a fluid.This is usually achieved by the introduction of pressurized fluid through the particulate medium.

Fluidized Bed Combustion for Clean Ener

Fluidized bed combustion (FBC) is today a well established technology for generation of heat, power and a combination of these. Yet, there has been a constant development and refinement of the technology since it reached commercial status in the early 80´s. With respect to the development of the technology, two THE BOILER MARKET

Circulating Fluidised Bed Combustion Boiler (CFB

Hot cyclones separate the circulating bed material from the flue gas stream leaving the furnace at around 880DegC. The solid particles separated from the flue gas are re-circulated back into the furnace through the loop seal.

How Circulating Fluidized Bed Boilers Wor

Fluidized Bed. At the bottom of the boiler furnace there is a bed of inert material. Bed is where the coal or fuel spreads. Air supply is from under the bed at high pressure. This lifts the bed material and the coal particles and keeps it in suspension. The coal combustion takes place in this suspended condition. This is the Fluidized bed.

Fluidized bed combustion - Wikiped

Fluidized bed combustion (FBC) is a combustion technology used to burn solid fuels. In its most basic form, fuel particles are suspended in a hot, bubbling fluidity bed of ash and other particulate materials (sand, limestone etc.) through which jets of air are blown to provide the oxygen required for combustion or gasification.

How Circulating Fluidized Bed Boilers Wor

Fluidized Bed. At the bottom of the boiler furnace there is a bed of inert material. Bed is where the coal or fuel spreads. Air supply is from under the bed at high pressure. This lifts the bed material and the coal particles and keeps it in suspension. The coal combustion takes place in this suspended condition. This is the Fluidized bed.

Computational Fluid Dynamics (CFD) for fluidized be

fluidized bed boiler design and retrofits Challenges Today the goals typically are to meet new emission limits and to replace fossil fuels by bio fuels and waste. The increasing use of low quality fuels sets high demands on the understanding and control of the furnace processes in order to ensure satisfactory operation and furnace availability.

text