logo

Hot Water for Less Let your new oil-fired boiler heat your home’s domestic hot water and save up to 50%.* Integrating indirect-fired DHW heating with your oil-fired boiler can save as much as 50% in operating costs when compared to conventional direct-fired hot water production.

There are two common options for using a home's boiler for water heating. The most common is referred to as a "tankless coil." This is a relatively small heat exchanger that fits into a gas- or oil-fired boiler. These are popular for people with hot-water baseboard heat because they're inexpensive options or retrofits for standard boilers.

Heating with Oil. Modern Oil Heating water production with your heating boiler, and manage the entire system with one of our control solutions. Or put the sun to work This allows the boiler to shut off completely when no heat is required, reducing fuel consumption and operating costs.

Heating › Boilers › Boiler bodies without burners › Heat modules › Burners › Water heaters › Puffers and storages › Splits and multisplits › Hydronic heat pumps (cooling/heating/dhw) › Radiators › Solid fuel stoves › Accessories and system components; Climatization › Hydronic systems (cooling+heating) › Splits and

Upgrading your furnace or boiler from 56% to 90% efficiency in an average cold-climate house will save 1.5 tons of carbon dioxide emissions each year if you heat with gas, or 2.5 tons if you heat with oil.

EnergyLogic is the trusted name in waste oil heating because we have the best combustion, delivered by the American-made Beckett burner. The efficiency of our waste oil burner produces the highest heat-rise, burning away more of the impurities that stay behind in the form of ash.

Heat-transfer fluids carry heat through solar collectors and a heat exchanger to the heat storage tanks in solar water heating systems. When selecting a heat-transfer fluid, you and your solar heating contractor should consider the following criteria:

Solar water heating (SWH) is the conversion of sunlight into heat for water heating using a solar thermal collector. A variety of configurations are available at varying cost to provide solutions in different climates and latitudes.

Oil boiler installations. Installation of the following oil systems should be carried out by a competent person: an oil-fired combustion appliance, which has a rated heat output of 100kW or less, and which is installed in a building with no more than three storeys (excluding any basement) or in a dwelling

The COP of an air-to-water system can drop to 2 in winter, but even that is still well over 100per cent more efficient than your old oil boiler. Air-to-water heat pumps can also heat the water in

Heating repair service in Marquette, MI. The Beauchamp Plumbing & Heating service department is well trained in service of all makes and models of furnaces (gas and oil), boilers, roof top units, and heat pumps.