Purchased equipment: high efficiency boiler chimney
Location: WUXI China
Telephone: +86 13861509127
E-mail: [email protected]
Contact us for more details about our boilers, solutions and services.

high efficiency boiler chimney

Molten salt heaters use molten potassium nitrate and sodium nitrite as heating media. Molten salt heater will heat the powder salt over the melting point until the viscosity of the molten salt allows circulating pump works, after the whole system is under circulating condition, then feed then into the thermal fluid heater for further circulating rising temperature to make it to be recycling used. Normal media working temperature is 400-550℃, top working temperature could reach 600℃.

Technical advantages

Digitized manufacture

  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.
  • The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.

Long life span

  • The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;
  • Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.
  • Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.

Less fuel consumption

  • Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.
  • Furnace adopts double close line coil, which makes heating surface sufficient.

Add Comment

Plastic Vent Pipes for High-Efficiency Condensing Furnac

The electronic ignition high-efficiency condensing furnace has special venting and condensate drainage requirements. Because of the special heat exchanger technology used by a condensing furnace, heat is extracted from the fuel combustion process for a longer period of time, to the point where the combustion exhaust gases have "cooled" and condensed.

Furnaces and Boilers | Department of Ener

Upgrading to a high efficiency furnace or boiler is an effective way to save money on home heating. Understanding the Efficiency Rating of Furnaces and Boilers. An all-electric furnace or boiler has no flue loss through a chimney. The AFUE rating for an all-electric furnace or boiler is between 95% and 100%.

Amazon.com: High Efficiency Gas Boile

Product Description designed for use with boilers, high efficiency gas and oil heaters and

is high efficiency gas boiler worth the investment? what'

A high efficiency gas boiler (>90%) must have the flue gas condense in order to achieve that efficiency. The flue gas will only condense when the return water temperature is 120 degrees or less. An ordinary system has return water temperature much higher than this, because this is the temperature for which your radiators are sized (typically

High Efficiency Boilers - FurnaceCompare.c

High efficiency boilers, which have an annual fuel utilization efficiency (AFUE) of 90% and above, use condensing technology. These boilers work by recovering heat from the flue gases that simply exit a house from the flue of a conventional non-condensing boiler.

Measure Guideline: High-Efficiency Natural Gas Furnac

The alternatives to the high efficiency natural gas furnace are other devices that use the same ducted air distribution systems such as electric heat pumps and combination heating and hot water systems where lower capacity is an acceptable option.

Venting a condensing boiler through chimney? — Heatin

chimney The chimney has two flues. One flue is devoted to a wood burning stove. The other flue currently supports a boiler and a FHA furnace. The old boiler will be replaced with the new high-effieciency boiler, and the FHA furnace will be replaced with an air handler connected to the new boiler.

Amazon.com: High Efficiency Gas Boile

Product Description designed for use with boilers, high efficiency gas and oil heaters and

Venting high-efficiency boilers into masonry chimney

Some high-efficiency appliances allow the use of plastic pipe for venting gases, and many induced-draft high-efficiency appliances can be vented through an outside wall. However, if an outside wall is inaccessible, most manufacturers offer alternatives for venting through an existing chimney.

High Efficiency Direct Vent Gas Boilers - eComfo

eComfort is an online High Efficiency Direct Vent Gas Boiler superstore, specializing in High Efficiency Direct Vented Gas Boilers, High Efficiency Direct Vent Gas Fired Boilers and High Efficiency Direct Vented Gas Fired Boilers.

Is a high efficiency, condensing gas boiler the bes

An ultra-high efficiency boiler is able to keep more heat in the heating system, but the side effect is condensation. So, back to the word “condensing.” As previously mentioned, the byproduct of harvesting more heat from the flue gas is the formation of condensate in the heat exchanger.