Purchased equipment: construction of a water tube boiler
Location: WUXI China
Telephone: +86 13861509127
E-mail: [email protected]
Contact us for more details about our boilers, solutions and services.

construction of a water tube boiler
Others

Molten salt heaters use molten potassium nitrate and sodium nitrite as heating media. Molten salt heater will heat the powder salt over the melting point until the viscosity of the molten salt allows circulating pump works, after the whole system is under circulating condition, then feed then into the thermal fluid heater for further circulating rising temperature to make it to be recycling used. Normal media working temperature is 400-550℃, top working temperature could reach 600℃.

Technical advantages

Digitized manufacture

  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.
  • The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.

Long life span

  • The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;
  • Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.
  • Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.

Less fuel consumption

  • Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.
  • Furnace adopts double close line coil, which makes heating surface sufficient.

Add Comment

Industrial Combustion Boilers - IEA-ETS

Industrial Combustion Boilers Boilers can be grouped into two broad categories: water-tube boilers and fire-tube boilers. In the water-tube boilers, tubes containing water are heated by combustion gases that flow outside the tubes, Boiler sales in 2002 amounted to 1/6 of the total sales in 1967.

Water Tube Boiler: Construction, Operation - ME Mechanic

Construction: A horizontal steam and water drum: this is the main part of the boiler.It is supported by a steel structure at a certain height and is independent of brickworks. The size of the boiler drum is small as compared with the boiler drum of a fire-tube boiler of the same capacity.

Fire-tube boiler - Wikiped

A fire-tube boiler is a type of boiler in which hot gases pass from a fire through one or (many) more tubes running through a sealed container of water. The heat of the gases is transferred through the walls of the tubes by thermal conduction , heating the water and ultimately creating steam .

Water Tube Boiler | Operation and Types of Water Tube Boil

A water tube boiler is such kind of boiler where the water is heated inside tubes and the hot gasses surround them. This is the basic definition of water tube boiler. This is the basic definition of water tube boiler.

Water Tube Boilers | SZS Series - bosch-industrial.com.

A full membrane wall structure made of tube and fin construction provides a gas tight furnace chamber resulting in a high combustion efficiency. A highly efficient stand alone economiser is installed at the near end of the boiler to lower flue gas temperatures and improve boiler efficiency.

Water tube boilers | Water-tube boilers | Tru-Stea

Tru-Steam Water Tube Boilers combine and proven qualities of the 2-durm “D” type construction with the outstandingly successful concept of package construction. This is the most common type of small – medium sized boiler, similar to the one shown in the schematic diagram.

Operation of water tube boilers explain

Why Water Tube Boilers ? In contrast to its internal construction, which includes a small steam drum and small diameter tubes, the water tube boiler is used to generate steam having high pressure and temperature. These small internal parts produce high volume steam for high capacity applications.

Construction and Working Principle of Lancashire Boile

For this boiler, hard fuel is burn at the grate. Like water tube boiler, water usually pumped into the shell through the economizer. This operation is performing by a water pump. This process increases the temperature of water before further action. Then the fire tube of this boiler is fully immersed into the water.

Fire-tube boiler - Wikiped

A fire-tube boiler is a type of boiler in which hot gases pass from a fire through one or (many) more tubes running through a sealed container of water. The heat of the gases is transferred through the walls of the tubes by thermal conduction , heating the water and ultimately creating steam .

Operation of water tube boilers explain

Why Water Tube Boilers ? In contrast to its internal construction, which includes a small steam drum and small diameter tubes, the water tube boiler is used to generate steam having high pressure and temperature. These small internal parts produce high volume steam for high capacity applications.

Design, Construction, Installation and Use of Boilers an

DESIGN, CONSTRUCTION, INSTALLATION AND USE OF BOILERS AND PRESSURE VESSELS SASKATCHEWAN REGULATION 262/67 Respecting the Design, Construction, Installation and Use of Boilers and Pressure Vessels – Made pursuant to sections 19 and 31 of The Boiler and Pressure Vessel Act SECTION 1 DEFINITIONS 101 In these regulations the expression:

text