Purchased equipment: expansion type water boiler
Location: WUXI China
Telephone: +86 13861509127
E-mail: [email protected]
Contact us for more details about our boilers, solutions and services.

expansion type water boiler
Others

Molten salt heaters use molten potassium nitrate and sodium nitrite as heating media. Molten salt heater will heat the powder salt over the melting point until the viscosity of the molten salt allows circulating pump works, after the whole system is under circulating condition, then feed then into the thermal fluid heater for further circulating rising temperature to make it to be recycling used. Normal media working temperature is 400-550℃, top working temperature could reach 600℃.

Technical advantages

Digitized manufacture

  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.
  • The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.

Long life span

  • The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;
  • Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.
  • Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.

Less fuel consumption

  • Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.
  • Furnace adopts double close line coil, which makes heating surface sufficient.

Add Comment

Water-tube boiler - Wikiped

A high pressure watertube boiler (also spelled water-tube and water tube) is a type of boiler in which water circulates in tubes heated externally by the fire. Fuel is burned inside the furnace, creating hot gas which heats water in the steam-generating tubes.

Boiler Types and Classifications - Wiki - odesie by Tec

A feature of hot water systems ('''Figure 6)''' is an expansion tank to accommodate the expansion of the water in the system as the water is heated. The expansion tank, Blow down is affected by the type of boiler, operating pressure, water treatment, and the amount and quality of make-up water.

Expansion Tank Application - Fluid

splits, resulting in boiler failure. How an Expansion Tank Works An expansion tank is only partially full of water on start up. The rest of the tank contains air. As the system water expands, the added system volume moves into the expansion tank, compressing the air, thereby increasing the air pressure, which “pushes

INSTALLATION MANUAL FOR BOILER SYSTEM EXPANSION TANK - Lowe'

3. Once the expansion tank is installed, re-pressurize the system and check for leaks. Repair as necessary. 4. Restart the boiler system and check for relief valve discharge. If the relief valve drips, the tank may be improperly charged or undersized. 5. The expansion tank is now operational and will absorb expanded water during boiler

Thermal Expansion Products - Watts Water Technologi

Thermal expansion of heated water may occur wherever potable water is heated in a closed system (when the potable water is iso - lated from the public water supply by a one-way valve, such as a pressure reducing valve, backflow preventer or check valve) .

Chapter 94 - Basic Fittings for Hot Water Boiler

When a closed type expansion tank oh a hot water boiler is completely filled with water and the water in the system is raised to a temperature so that it expands, the result will be that:

Hot Water Boiler Expansion Tanks - HVAC Hydroni

Hot Water Boiler Expansion Tanks – There are two types of expansion tanks used on hot water boiler systems. The steel expansion tank and the bladder type expansion tank. These expansion tanks are used to provide a cushion for the expansion of water when it is heated.

Boiler Types and Classifications - Wiki - odesie by Tec

A feature of hot water systems ('''Figure 6)''' is an expansion tank to accommodate the expansion of the water in the system as the water is heated. The expansion tank, Blow down is affected by the type of boiler, operating pressure, water treatment, and the amount and quality of make-up water.

Basic Fitting for Hot Water Boilers Flashcards | Quizl

The air released from the water in the closed expansion tank type hot water heating system is directed to the expansion tank The scale on the dial of a pressure gauge shall have a maximum graduation of _____ times the maximum allowable working pressure

Thermal Expansion Products - Watts Water Technologi

Thermal expansion of heated water may occur wherever potable water is heated in a closed system (when the potable water is iso - lated from the public water supply by a one-way valve, such as a pressure reducing valve, backflow preventer or check valve) .

Expansion tank - Wikiped

An expansion tank or expansion vessel is a small contains air under pressure, and normally a Schrader valve (car-tire type valve stem) for checking pressures and adding air. When the heating system is empty or at the low end of the normal range of working pressure, the diaphragm is pushed against the water inlet; as the water pressure

text