Purchased equipment: power plant using boiler
Location: WUXI China
Telephone: +86 13861509127
E-mail: [email protected]
Contact us for more details about our boilers, solutions and services.

power plant using boiler

Molten salt heaters use molten potassium nitrate and sodium nitrite as heating media. Molten salt heater will heat the powder salt over the melting point until the viscosity of the molten salt allows circulating pump works, after the whole system is under circulating condition, then feed then into the thermal fluid heater for further circulating rising temperature to make it to be recycling used. Normal media working temperature is 400-550℃, top working temperature could reach 600℃.

Technical advantages

Digitized manufacture

  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.
  • The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.

Long life span

  • The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;
  • Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.
  • Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.

Less fuel consumption

  • Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.
  • Furnace adopts double close line coil, which makes heating surface sufficient.

Add Comment

Power Dominates consumption pattern in boiler steam powe

The major problems of boiler and energy managements are heat loss, smoking dust present in the internal body of the fire tub and scaling in the boiler. It is a series problem which exists in the steam power plant of boiler and affects the energy management by excess fuel and time consumption.

Preservation & Maintenance Techniques of Boilers i

‘Wet preservation’, using ammonia & hydrazine solutions and possibly nitrogen filling, can be used for preservation over quite extended periods. However, the first choice for the preservation & Maintenance of boiler, turbines, condensers and feed systems shall be ‘dry preservation’ with dry air circulation.

Simulation of a Subcritical Power Plant using a Boile

The objective of this work is to model a pulverized coal power plant and some of its component units and to apply control based in the boiler following control approach, in order to analyse the control system and the power plant performance at di erent operational conditions. The ETI-CCS project

What are the list of issues with using salt water i

I think the question makes a common misunderstanding. Steam boilers for power or heating use highly purified and chemically conditioned water, which is largely recycled, so water use is not a serious environmental issue. The steam produced is cond

Simulation of a Subcritical Power Plant using a Boile

starting with the pulverized coal power plant, the basis of the thesis. The modelling is developed in gPROMS and consists building some units to be added to the power plant library. Some of the models are grabbed from this library to be connected and to represent a pulverized coal power plant.

Using the Right Boiler to Make Power Plant Economics Wo

Rayonier accomplishes all of its power generation onsite. As it is connected to the grid, it sells excess power to the local utility Florida Public Utility (FPU). In the event of downtime, it can draw power from the grid. FPU, in turn, will use the power it produces at Eight Flags Energy to supply about half of Amelia Island’s electric

Static Simulation of Boiler Structure in Power Plant Usin

This boiler structure, part of a large power plant, is an example that is characterized by thin-walled members. Finite Element Analysis (FEA) is a common method used for strength analysis, but the large size of this structure presents a number of challenges that can delay FEA.

Thermal power station - Wikiped

A thermal power station is a power station in which heat energy is converted to electric power. with new "ultra critical" designs using pressures of 4400 psi (30.3 MPa) Boiler make-up water treatment plant and storage

Boiler (power generation) - Wikiped

The steam generator or boiler is an integral component of a steam engine when considered as a prime mover.However it needs to be treated separately, as to some extent a variety of generator types can be combined with a variety of engine units.

Components & Working of Thermal Power Pla

In thermal power, plant water is used in large quantity this water is converted into steam and used to rotate the turbine so this water and steam come into direct contact with the boiler, boiler tubes, boiler accessories, and turbine blades.

Thermal Power Plant Boiler Misoperation - Case Study Using C

The boiler under consideration is part of a pulverized coal power plant operating in a subcritical steam cycle. The combustion chamber is rectangular in shape with four burners firing from each corner, producing a large vortex in the center of the chamber. The evaporation process occurs mainly in the tubes covering the boiler walls.