Purchased equipment: caustic rotary kiln waste heat recovery
Location: WUXI China
Telephone: +86 13861509127
E-mail: [email protected]
Contact us for more details about our boilers, solutions and services.

caustic rotary kiln waste heat recovery

Molten salt heaters use molten potassium nitrate and sodium nitrite as heating media. Molten salt heater will heat the powder salt over the melting point until the viscosity of the molten salt allows circulating pump works, after the whole system is under circulating condition, then feed then into the thermal fluid heater for further circulating rising temperature to make it to be recycling used. Normal media working temperature is 400-550℃, top working temperature could reach 600℃.

Technical advantages

Digitized manufacture

  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.
  • The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.

Long life span

  • The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;
  • Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.
  • Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.

Less fuel consumption

  • Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.
  • Furnace adopts double close line coil, which makes heating surface sufficient.

Add Comment

Kilns/Coolers - International Cement Revi

Gold Sponsor Bricking Solutions +1-360-794-1277 1144 Village Way Monroe Washington 98272 United States <p>Bricking Solutions, a division of Brokk, offers the best, most comprehensive system available for kiln refractory maintenance.

Waste Heat Recovery Boiler In Acetic Acid Manufacturin

China Glass Kiln Waste Heat Recovery Boiler . Equipped with one of the best glass kiln waste heat recovery boiler brands, JSDJ Heavy Industry Co.,Ltd is one of the professional quality waste heat recovery in glass-furnace, waste heat recovery boiler in glass industry, waste heat . Chat Online

The Economics of Energy Recovery from Industrial Wast

its own waste and even more rare for any heat recovery equipment to be included. Four years ago or less the larger industrial plants started investigating such systems because the economics were certainly improving in favor of waste in­ cineration with heat recovery, due simply to the cost of purchased fuel going up so rapidly.

Waste Heat Recovery from Cement Kiln – Radiant Coolin

One of effective methods of improving the efficiency of rotary kiln, is through waste heat recovery around the kiln surface. Radiant panel can be installed along the kiln that can harvest the heat dissipated through the kiln surface.

2-3 Lime Kiln Chemistry & Effects on Operatio

A lime kiln is used to convert lime mud into lime for reuse in the causticizing plant of the kraft recovery process. Many of the problems encountered in lime kiln operations can be related to kiln chemistry, including TRS and SO2 emissions, dusting, ringing and refractory brick thinning. Understanding the composition and thermal behaviour of

Vulcan Indirect Fired Thermal Desorption Un

mixing tanks, caustic spray manifold, and circulation system. Heat Recovery Heat recovery system using heat from thermal oxidizer to preheat combustion air in burners. This option can save up to 25% of fuel consumption in the system. Waste Oil Burner System Additional waste oil burner system consisting of waste oil burners, fuel

Recuperator for waste heat recovery from rotary kiln

The energy balance of a rotary kiln used for calcination of dolomite in a magnesium production company identified the kiln shell (26.35% of the input energy) and exhaust gases (18.95%) as the major sources of heat losses.

Waste Management & Research Industrial hazardous wast

The heat recovery system consists of a waste heat boiler and an air preheater. The waste heat boiler cools the flue gas leaving the post-combustion chamber from 1100 to 550 C. The air preheater follows at the end of the waste heat boiler. Air is pre-heated to 200 C and then injected in the front end of the rotary kiln and the middle of the

Performance modeling of radiant heat recovery exchanger

The problem of recovering heat lost from external surface of rotary kilns is discussed. A mathematical model of heat recovery exchangers for rotary kilns is developed. Heat exchange mechanisms and heat recovery performances bounds are discussed. A cost model and criteria for determining optimal equipment size are developed.

Waste Heat Recovery in Cement plant - ijert.o

waste heat gases and the economics involved. Large quantity of hot flue gases is generated from Boilers, Kilns, Ovens and Furnaces. If some of this waste heat could be recovered, a considerable amount of primary fuel could be saved. The energy lost in waste gases cannot be fully recovered. Waste heat Recovery means allowing the waste heat to

Experience of Incinerator Development in Jap

Kiln type Circular flow melting · Mitsui Engineering & Shipbuilding Co., Ltd. · Takuma Co., Ltd. Waste heat boiler High temperature air heater Rotary melting furnace Deaerator Secondary air heater Bag filter Improvement of heat recovery rate Increased boierl temperature and pressure Waste Air/exhaust gas Combustion chamber