Purchased equipment: latest line for the production of gas silicate autoclaved aac
Location: WUXI China
Telephone: +86 13861509127
E-mail: [email protected]
Contact us for more details about our boilers, solutions and services.

latest line for the production of gas silicate autoclaved aac
Others

Molten salt heaters use molten potassium nitrate and sodium nitrite as heating media. Molten salt heater will heat the powder salt over the melting point until the viscosity of the molten salt allows circulating pump works, after the whole system is under circulating condition, then feed then into the thermal fluid heater for further circulating rising temperature to make it to be recycling used. Normal media working temperature is 400-550℃, top working temperature could reach 600℃.

Technical advantages

Digitized manufacture

  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.
  • The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.

Long life span

  • The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;
  • Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.
  • Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.

Less fuel consumption

  • Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.
  • Furnace adopts double close line coil, which makes heating surface sufficient.

Add Comment

Autoclaved Aerated Concrete Production | Masa Gro

The manufacturing of autoclaved aerated concrete products demands high standards for mixing and dosing of the aggregates, the control of the fermentation process and the control of each production step. Masa's aerated concrete installations are proven advanced technology processes, designed according to customers specific requirements.

China Autoclaved Hydraulic Press Brick, Brick Makin

This production line provides the combined advantages of AAC block production line and sand-lime brick production line. Our company is the only one in China that can provide a combined AAC block and sand-lime brick production line.

Tailings can be wall material !Ceramic tailings for AA

Using ceramic waste as the main raw material, manufacturing light AAC block and panel. With the new production line, 500,000 tons of ceramic waste residues annually are expected to be consumed at the end of 2017.

(PDF) Utilization potential of fly ash together wit

The increase in the number of thermal power plants has led to the production of an increasing amount of fly ash that causes high environmental impact in Turkey.

Germany technology sand lightweight AAC block equipmen

In 2012 and 2017,Dongyue successfully held China AAC industry meeting,which is the most professional AAC industry in China.This shows Dongyue's leading position in the AAC instry and Dongyue's strength in the manufacture of AAC block and panel production line.

Autoclaved Aerated Concrete plant, Autoclaved Aerate

aac plant autoclave aerated concrete (aac) plant for aac block which is the light . autoclaved aerated concrete block plant aac production line/aac plant . 1 . the capacity required to configure 8 sets 31m aac autoclave . autoclaved aerated concrete blocks also known as autoclaved cellular concrete with more than 6

China High Precision AAC Sand Lime Brick Machine - Chin

part of the factory management system, all posts accountability of production line, process rules, safety rules, setting a quota of staff and posts, pre-production tools directory, laboratory instruments, product catalogs, and test methods.

Autoclaved aerated concrete - Wikiped

Autoclaved aerated concrete (AAC) is a lightweight, precast, foam concrete building material suitable for producing concrete masonry unit (CMU) like blocks. Composed of quartz sand , calcined gypsum , lime , cement , water and aluminum powder , AAC products are cured under heat and pressure in an autoclave .

AAC Panel Production Line - To Build Autoclaved aerate

AAC Panel Production Line . AAC Panel (Autoclaved aerated concrete slabs), it is mainly composed of silica sand, cement, aluminum powder, lime. The double layer, two-way steel net which is anti-rust & anti-corrosion inside the panel.

China 20000-300000m3/Y AAC Block Making Plant Fro

It can be said of autoclaved aerated concrete block is a chemical made by a special method of gas gas autoclaved porous silicate concrete.currently,autoclaved aerated concrete block product is the highrise building frame structure of various raw materials,no other product can substitute for its future in the ascendant,there is no risk of

Zhengzhou Boiler Co.; Ltd - zgaacautoclave.c

Manufacturer of Autoclave Aerated Concrete AAC Production Line - AAC Plant in BrickMaking Machine, Small AAC Plant, Autoclaved Aerated Concrete Equipment and AAC. AAC Block Making Plant - AAC Bricks Line Manufacturer from Manufacturer of AAC Block Making Plant - AAC Bricks Line, Small AAC Plant, AACLightweight Bricks Making Machine and AAC

text