Purchased equipment: cfbc boiler technology
Location: WUXI China
Telephone: +86 13861509127
E-mail: [email protected]
Contact us for more details about our boilers, solutions and services.

cfbc boiler technology
Others

Molten salt heaters use molten potassium nitrate and sodium nitrite as heating media. Molten salt heater will heat the powder salt over the melting point until the viscosity of the molten salt allows circulating pump works, after the whole system is under circulating condition, then feed then into the thermal fluid heater for further circulating rising temperature to make it to be recycling used. Normal media working temperature is 400-550℃, top working temperature could reach 600℃.

Technical advantages

Digitized manufacture

  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.
  • The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.

Long life span

  • The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;
  • Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.
  • Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.

Less fuel consumption

  • Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.
  • Furnace adopts double close line coil, which makes heating surface sufficient.

Add Comment

long chuan boiler – CFBC Boiler Manufactur

Keyword: CFBC Boiler Manufacturer, long chuan boiler FAQ about long chuan boiler 1.Why choose ZG as long chuan boiler manufacturer? We have over 70 years' experience

Circulating fluidized bed - Wikiped

The circulating fluidized bed (CFB) is a developing technology for coal combustion to achieve lower emission of pollutants. By using this technology, up to 95% of pollutants [1] can be absorbed before being emitted to the atmosphere.

Developments in circulating fluidised bed combusti

is applied to a CFBC boiler, the combustion temperature can be controlled by recycling a portion of the cooled solids to the furnace through a fluidised-bed heat exchanger, therefore minimal flue gas recirculation is required. This characteristic allows the oxy-CFB boiler to be made smaller and less expensive in a new unit application.

AFBC Boiler VS CFBC Boiler - circulatingfluidizedbedboiler.c

Advantages of CFBC Boiler over AFBC Boiler. CFBC technology evolves from AFBC to overcome some of the Problems of AFBC. a).Better Space utilization for large Industrial units b).Efficient combustion c).Better SO2 capture d). Better Techniques for Nox Control e).Better temperature Control

About – CFBC Boil

ZG Boiler is a circulating fluidized bed boiler manufacturer in China. Established in 1945 with a focus on safe, quality production, ZG is the CFB boiler manufacturer of choice for power plants.

Technology comparison of CFB versus pulverized-fuel firin

Keywords: boiler, CFB, PC, once through supercritical technology Abstract—Recent developments in Circulating Fluidized Bed (CFB) once through supercritical technology (OTSC) have enabled this technology to be offered as utility-scale projects competing head to head with pulverized fuel (PF) once through supercritical

Developments in circulating fluidised bed combusti

is applied to a CFBC boiler, the combustion temperature can be controlled by recycling a portion of the cooled solids to the furnace through a fluidised-bed heat exchanger, therefore minimal flue gas recirculation is required. This characteristic allows the oxy-CFB boiler to be made smaller and less expensive in a new unit application.

Circulating Fluidised Bed Combustion Boiler (CFB

The low combustion temperature of 880 – 900 DegC in EnmasGB CFB technology eliminates slag formation in the furnace and reduces the volatilisation of alkali salts. Operating at such low temperatures also means boiler corrosion and convective surface fouling is reduced.

CFB: Technology of the Future? - Power Engineeri

Early-generation CFB technology emerged in the late 1970s and early 1980s as bubbling fluidized bed technology using the same boiler floor grid as circulating designs. Ash or river sand was

CFB: Technology of the Future? - Power Engineeri

Early-generation CFB technology emerged in the late 1970s and early 1980s as bubbling fluidized bed technology using the same boiler floor grid as circulating designs. Ash or river sand was

Fluidized bed combustion - Wikiped

Fluidized bed combustion (FBC) is a combustion technology used to burn solid fuels.. In its most basic form, fuel particles are suspended in a hot, bubbling fluidity bed of ash and other particulate materials (sand, limestone etc.) through which jets of air are blown to provide the oxygen required for combustion or gasification.

text