Purchased equipment: autoclave for aerospace industry
Location: WUXI China
Telephone: +86 13861509127
E-mail: [email protected]
Contact us for more details about our boilers, solutions and services.

autoclave for aerospace industry

Molten salt heaters use molten potassium nitrate and sodium nitrite as heating media. Molten salt heater will heat the powder salt over the melting point until the viscosity of the molten salt allows circulating pump works, after the whole system is under circulating condition, then feed then into the thermal fluid heater for further circulating rising temperature to make it to be recycling used. Normal media working temperature is 400-550℃, top working temperature could reach 600℃.

Technical advantages

Digitized manufacture

  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.
  • The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.

Long life span

  • The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;
  • Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.
  • Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.

Less fuel consumption

  • Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.
  • Furnace adopts double close line coil, which makes heating surface sufficient.

Add Comment

Aerospace Autoclave | Autoclave Supp

Aerospace Autoclave Contact Lee Aerospace or Request a Quote for Windshield and Cabin Window Repair, Replacement Parts (PMA), Aftermarket Windshield and Window Services What Is The Function Of Autoclave Machine At Autoclave Services, we understand the needs of your profession and of health providers in general.

Aerospace Autoclave, Aerospace Autoclave Suppliers an

Alibaba.com offers 98 aerospace autoclave products. About 4% of these are sterilization equipments. A wide variety of aerospace autoclave options are available to you, such as free samples.

Autoclaves for Aerospace Applications: Issues an

T. Taricco, “Autoclave cure systems,” in ASM Engineering Hand book, Manufacturing Processes-Aerospace, 1991. Ramaswamy, Dayananda, and Subba Rao, “Development of a door steering mechanism for a large autoclave,” in Proceedings of the National Conference on Recent Advances in Design Engineering (RADE '07), 2007.

Autoclave Systems for Curing Aerospace Composit

We have been supporting the aerospace composites industry with autoclave and autoclave control systems for more than 20 years. Composite bonding autoclave systems have been used by aircraft manufacturers for decades, first in military applications (B2 bomber, F117 fighter, F18, etc.) and now with most commercial aircraft.

Autoclave Inerting for the Aerospace & Aircraft Industr

Autoclave inerting is a key process used to meet the demands of modern aerospace and aircraft design. This application allows you to create high-performance parts that are lightweight but incredibly strong — perfect for the extreme conditions your aircraft might face.

Autoclave - an overview | ScienceDirect Topi

Autoclave curing is the most widely used method of producing high-quality laminates in the aerospace industry. Autoclaves are extremely versatile pieces of equipment. Since the gas pressure is applied isostatically to the part, almost any shape can be cured in an autoclave .

Autoclaves for Aerospace Applications: Issues and Challeng

International Journal of Aerospace Engineering is a peer-reviewed, Open Access journal that aims to serve the international aerospace engineering community through dissemination of scientific knowledge on practical engineering and design methodologies pertaining to aircraft and space vehicles.

American Autoclave Company - Aerospace - Aerospa

Our mission at American Autoclave Company is to deliver the best possible equipment to facilitate in our customers' success. Towards this end, we have designed, manufactured, and installed some of the most advanced autoclaves in the world for sectors including industrial, educational, and research facilities.

Aerospace Autoclaves - Premier Autoclaves | Autoclav

Our upgrades and Curemanger Autoclaves control system are fully compliant within the Aerospace market to NADCAP (National Aerospace & Defence Contractors Accreditation Programme), Boeing, Airbus and all other relevant specificatons as required by our customers and is used to cure and manufacture million of pounds of product each year.

Autoclave (industrial) - Wikiped

The aerospace industry manufactures small numbers of very expensive products and is thus able to afford the high capital and unit operating costs of autoclaves. Typically, this entails applying carefully controlled levels of heat and pressure to parts and assemblies.

Autoclave Systems for Aerospace Composit

“A proven industry leader” We deliver specialized autoclave, oven, & control systems to meet the process requirements of the aerospace, composites, ballistics, glass